Jun 8, 2024 · We just got our 2023 Can-Am® Defender DPS HD9 a few months ago. Since we noticed a front end vibration when slowing down, going under 15mph, and turning lately. Seems to be on driver side. When going faster don't feel the vibration. We have all terrain tires and drive it on the blacktop sometimes but the vibration was never there when we first ...

Apr 24, 2011 · Unlike a fuse, you can't just look at a relay to tell if it's good or bad. Try pulling the relay for the DPS unit and replacing it. There are testers for them, but the relays are only a coupla bucks at any Auto parts store. I'd try just replacing it, first. Then, if it still acts up, change each of the relays, replacing them with a known good one.

Apr 5, 2023 · 2016 Can-Am Outlander Max XT 650 - Maxxis BigHorn 26" tires, Front ARB Bumper, 2,000-lb Winch, Aluminum Skid Plates and Foot Pegs, Fender Flares, Max LinQ Box, Can-Am Sport Windshield, Rear Tusk Box, Tow Hitch and Ball, Fender Bags.

Aug 25, 2020 · Hi everyone! I have a 2016 1000 XT Outlander (so G2). I've installed tracks on it and I also want to fit a DPS module wich I have to purchase from Ebay. But there are so many product codes for those on internet and I don't know wich one fits my atv. I can't go to a dealership, because they don't sell those in my country, so they won't help.

Dec 19, 2022 · If pressed and held, it switches the DPS modes: Low, Med, Max. 2016 Can-Am Outlander Max XT 650 - Maxxis BigHorn 26" tires, Front ARB Bumper, 2,000-lb Winch, Aluminum Skid Plates and Foot Pegs, Fender Flares, Max LinQ Box, Can-Am Sport Windshield, Rear Tusk Box, Tow Hitch and Ball, Fender Bags.

Jan 23, 2020 · Then by pushing the over ride button, on and off you can change the DPS from MIN to Med to MAX. When you shot off the ATV and wait for the lights to go out, when you start your ATV back up the screen should tell you the DPS mode you choose. To have the Track DPS again, you must push and hold the over ride button till the Icon appears.

May 12, 2014 · the dps overheat when it's tuff too steer and run too slow , the engine is very hot and seem to be him they overheat the power steering excuse my English ... le dps est devient trop chaud quand c'est dur a tourner et le véhicule avance pas assez vite pour le refroidir - quand le moteur vient tres chaud , ça semble a etre lui qui fait ...

Apr 14, 2012 · In some cases it is the spark plug wires causes too much electrical interference on the DPS wires, which causes the "DPS voltage sensor overload" fault code. Their fix for this is to turn the plug wire boot around and route the plug wire away from DPS wire and if needed, zip-tie the DPS wire away as well.

Jun 15, 2012 · The Apache tracks comes with another DPS module that give you 3 track DPS settings as well adjusts the speedometer to compensate for the tracks slower speed. This must be removed when switching back to tires.

Aug 8, 2022 · When I updated the PC3 and tightened everything that I could and put it all back together, all lights and DPS were working. Yesterday spent the whole day on it with our grandkids and parked it for dinner, went out to bring it into the garage, everything was back to the old gauges problems and the DPS wasn't working, no power steering.